| High Definition | ||||
|
|
TECHNICAL DETAILS OF FLIR SYSTEM HD
The FLIR SYSTEM HD sets a new performance standard for gyro-stabilized aerial camera systems. Image stability for superior to conventional aerial cameras is provided by a 5-axis gyro-stabilized design. Images remain steady, even in tightly banked turns. This advanced gyro system cannot be unseated by extreme aircraft maneuvers. Due to active directional control It has a picture stability of +/- 0,5 pixel at longest focal length. Field of Regard: Elevation +20° bis -110° Azimuth 360° continuous Roll function: +/- 23° Maximum Slew Rate: 60°/sec. Minimum Slew Acceleration: 150°/sec. Zoomrange: Fujinon HA 22 x 7.8mm – 172mm with 2x extender 15,6mm – 344mm Format: 16:9 / (SD 4:3 and 16:9) Operating Temperature: -25°C bis 45°C Mon. Object distance (MOD): 0,8 m FLIR System HD, existing of: • Sony Digital 2/3’’, HD- Camera HDC-1500 RGB • Sony Remote Control Unit RM-B750 • Sony HD-Cam SR VTR SRW-1 / SR-PC1 • Sony 9’’-HD-Monitor LMD 9050 for operator • Astro 6’’ Vector-Waveform-Monitor WM 3014 for operator or DIT • LCD-Monitor for Director • LCD-Monitor for Pilot • GPS data recording HD-DSP (High-Definition Digital Signal Processor): The HDC-1500 portable camera utilises advanced HD Digital Signal Processing with 14 bit A/D converters. It also incorporates a newly developed CCD imager that creates images in either 1080 50 or 60 frame progressive or 1080 50 or 60 field interlace frame rates, depending on desired final system output. The new CCD and DSP LSI are two key devices that allow stunning image creation in a variety of scanning modes. The new camera system accommodates all popular interlace and progressive scan formats including 1080/50, 1080/24P as well as the highest-quality 720/50P images. The HDC-1500 camera provides digital transmission using SMPTE standard fibre optic cable to transmit high-quality digital data over long distances. The camera also provides two HD SDI outputs and one digitally down-converted SDI or analogue composite output. In addition, viewfinder signals with characters can be output from the SDI output connector, giving camera operators additional convenience. Furthermore, when in 24P operation, the built-in 2-3 pull-down function of the HDC-1500 enables 60i down-converted SD signals to be output on a standard SD monitor - a capability that also minimises the flicker that generally occurs on the viewfinder. The HDC-1500, if required, can be operated in a triax environment utilising the HDTX-100 triax adapter. Je nach Qualitätsanspruch stehen die unterschiedlichsten Aufzeichnungsmöglichkeiten zur Verfügung: • HD-Cam SR für 440mb/s oder 880mb/s • Recordingdatenraten in 4:2:2 oder 4:4:4 • HD-Cam für 144 mb/s in 3:1:1 • Digital Betacam 100mb/s • DV-Cam 25mb/s Wichtige Objektivdaten im Überblick: Fujinon HA22X7,8 BERD-G Bildgröße: 2/3’’ Brennweite: 7,8 – 172mm (1x) / 15,6 – 344mm (2x) Zoomfaktor: 22x Extender: 2x Max. relative Öffnung: F1.8 (7,8 – 172mm) / F3.7 (344mm) Naheinstellgrenze (MOD) 0,8 m Stabilization: 5-axis
gyro-stabilization Field of Regard: Elevation
+20° bis -110° Azimuth 360° continuous Roll function: +/-
23° Maximum Slew Rate: 60°/sec. Minimum Slew Acceleration: 150°/sec. Zoomrange: Fujinon
HA 22 x 7.8mm – 172mm with 2x extender 15,6mm – 344mm Format: 16:9
/ (SD 4:3 and 16:9) Operating Temperature: -25°C bis 45°C
Mon. Object
distance (MOD):
0,8 m |





